Aspire’s EVO 75W is basically what every new vaper needs to get a real first-hand experience of quality vaping. The EVO75 kit features a sub-ohm vaping system and is packed with two new vaping hitters, namely, the Atlantis EVO tank and the NX75 mod.
To keep your adrenaline running in excitement, let me tell you that the EVO75 cannot be compared with any other typical starter kit as it performs way better. New or old vapers alike will definitely enjoy their vaping experience with the EVO75.
The NX75-Z 75-watt box mod is made from a die-cast zinc alloy. Overall, its texture is smooth and is a mix between satin and glossy. It has a 75 mm length and 22 mm width, so don’t plan on fitting an atomizer with a size of more than 22 mm unless you are okay to deal with some overhang.
It comes with an ultra-intuitive five button configuration. Usually, mods only have a three button layout – a fire button and two regulatory up (+) or down (-) buttons. But the NX75 mod’s five buttons system gets rid of a menu system and allows you two quick and simple commands when switching to different modes. It has a one-button navigation between Temperature Control and Wattage modes, and a Customizable Firing Button Profile (CFBP) function that gives off a fine-tuned power curve. The CFBP allows you to set the wattage every 0.5 second intervals
Both the W (wattage modes) and T (temperature modes) buttons could be easily located right below the fire button, while the (+) and (-) buttons are just below the display screen. Pressing the W (wattage) button brings you variable wattage, variable voltage, bypass mode, and CFBP C1-C3, which are custom power curve settings. On the other hand, clicking the T (Temperature) button will cycle through nickel, titanium, and stainless steel 316L and your three TCR profiles (M1-M3). It can fire between 200oF and 600oF. Its OLED screen, which automatically flips depending on which way you look at the display, is surrounded by two extra buttons to make the navigation smooth. The mod also has an 8-mm square fire button that is quick to respond and has minimal firing delay.
The NX75 is powered by a single high-rate 18650 battery, which is not included in the kit. Just like the Innokin Disrupter, its battery compartment can be detached from the rest of the mod. Battery orientation markings are found at the battery compartment and inside the mod. This offers an extra layer of protection against potential installation errors, even though the mod is also equipped with Reverse Polarity Protection. The mod has eight small holes at the bottom to serve as battery venting as well.
Despite flaunting a very simple and basic design, the Aspire EVO75 Kit offers a number of ways to customize every detail of the vaping process and all the bells and whistles you would expect. This mod can fire up to 75 watts with a maximum voltage output of 8.5 volts. Thus, it is possible to run your higher-ohm coils (up to 3.5 Ω), although this can still handle down to 0.1 Ω.
Another interesting feature of this device is the ability to install a Child Lock protection (holding the W and (-) buttons simultaneously), in which you can place a three digit password. A photo of a big lock will be displayed until the password is entered. This could be very helpful for parents to keep their curious kids from being harmed.
The device could be charged using a micro-USB port with a 2 amp charging feature. It also supports passthrough, but this is not recommended. Firmware upgrades are also available.
On the other hand, the Atlantis EVO tank allows high VG e-liquid a faster route to the coil system. The kit comes with both 0.4 Ω and 0.5 Ω sub-ohm coils to give a better vaping experience. It is 22 mm in size and has a 2-ml e-juice capacity. But you can increase that to 4 ml using an optional extension glass and adapter. It has an easy top-fill system and comes with a silicone sleeve around that top cap.
This kit will definitely achieve great taste especially when using premium e-juices like the blends from Black Note. With a reputation of having the best e-liquid on the market, this is surely a perfect pair for the Aspire EVO75 Kit. All six unique blends are available at Caktus Vape for only AUD $34.95.
Make sure you get your own Aspire EVO75 Kit too at https://caktusvape.com for only AUD $89.95. It is available in black, white and stainless steel color. Included in the box are an Atlantis EVO tank; a pre-installed 0.4ohm coil, an NX75 MOD, a micro-USB cable, a 2-ml replacement Pyrex tube, an extra 0.5 ohm coil, a user manual, and a rubber cuff.